DIY Chiller Plans from John H. Rose - 10/17/99 Addendum to Don Carner's Original Plans posted at Hawaiian Quality Fish

   · John's 10/17/99
        Addendum to Don's
        Chiller Plans
   · John's 05/22/00
      Revised Chiller
      Modifications
   · Don's Original
      Chiller Plans

DIY Chiller Plans

Addendum to: Don's Original Chiller Plans
Submitted by: John H. Rose
Dateline: 10/17/99

"I found your chiller design on the Internet just as I was on my way to Home Depot to build my own chiller. I used a design similar to Don Carner's, but added a cold water bath circuit. Perhaps this could be submitted as an addendum to Don's design that is posted. Your construction description applies to my design as well." -- JHR

Before building this chiller, refer to John Rose's 05/22/00 Revised Chiller Modifications!

Diagram & Instructional Notes

The 18" x 18" x 23" measurement is the external dimensions of the refrigerator. I also recommend keeping the freezer section's remaining dead space filled with soft cold packs. This seems to help the freezer more efficiently chill the water bath. -- JHR

Please refer all questions or assistance needed for this DIY Chiller project to:

John Rose

john-rose@ouhsc.edu

Don Carner

dcarner@buckeye-express.com

DISCLAIMER: This DIY project was submitted for printing by John H. Rose as an addendum to Don Carner's original chiller plans. Neither Hawaiian Quality Fish, Don Carner, or John H. Rose will be responsible for any damages that may result from using these plans.

More DIY Project Resources
at About Saltwater Aquariums