A calcium hydroxide reactor is a very simple piece of equipment that dissolves calcium hydroxide into pure water. The solution has a high pH, around 11-12, and at this level has a significantly high solubility of calcium. The saturated calcium hydroxide solution is is then added into the reef aquarium in a slow manner, typically as the evaporation top up. It adds both calcium, Ca²⁺, and carbonate, CO₃^2-, (indirectly via the hydroxide, OH^-) to the system, increasing both calcium and alkalinity levels.

The calcium hydroxide reactor adds 1 meq/l alkalinity for 20ppm calcium, which is the same ratio that is utilised by calcifying organisms. This is the reason why it is such a good techinque for maintaining the calcium and alkalinity levels, it adds them in the same ratio in which they are used up. This is also why it cannot be using for fixing imbalances of calcium/alkalinity, a separate additive (calcium chloride or sodium bicarbonate) has to be used for that or significant water changes.

Write Comment
Please keep the topic of messages relevant to the subject of the article. Personal verbal attacks will be deleted. Please don't use comments to plug your web site. Such material will be removed. Just ensure to *Refresh* your browser for a new security code to be displayed prior to clicking on the 'Send' button. Keep in mind that the above process only applies if you simply entered the wrong security code.
Name:
E-mail
Homepage
Title:
Comment:
Code:*

Powered by AkoComment!