OZ REEF

Search
Quick Tips
Communist Corals

The stomach cavities of colonial polyps are interconnected, enabling food to be shared among all the polyps within the colony. If one polyp catches more than its fair share of food, it is shared with the colony.

 
Main Menu
Home
Equipment
Journal
Gallery
Library
FAQ
DIY Plans
DIY Links
Personal
Search
Site Map
Support
Finding information here useful? Any financial support to assist with bandwidth expenses is appreciated. Using PayPal you can ...
Visitors: 13611269
DIY Links
Random
A Gravity-Feed Siphon Topoff System 
Air Stone Protein Skimmer (OZ REEF) 
Nilsen Reactor Information 
Venturi Skimmer 
Deionisation Filter 
Chiller Plans 
Electronic Cookbook Archive 
Ranco Electronic Temperature Controller 
DIY Backings for Tanks 
Building Your Own Doser 

Home arrow DIY Plans arrow Additives arrow Fish and Coral Feeder

Fish and Coral Feeder PDF Print

by Dr_DBW

Very simple to put together this project, even you untalented DIY types could do this one ;-) The airline joiner has to be glued into the end of the baster, either using an epoxy resin or some other type of strong glue. Have to make sure that the glue does not get onto the other end of the joiner, otherwise the airline will not seal onto it properly. You can glue the airline on to the other end of the joiner, but I left this free to come off, this way can use the baster to feed corals in the upper regions of the tank where it can reach.

Then cut a short length of airline off the end and attach it to the elbow, around 3-5 cm is good length. Attach the airline up the plastic rod using the cable ties, make sure they are not too tight, otherwise will cut off the airline hole. I then glued the airline elbow to the rod so that it does not rotate if it hits a rock or something in the tank. And that is about it, nice and simple.

1m x Plastic Rod
This bit was left over from a piece I used in the skimmer. It is actually used for windows or something, just saw it in the hardware store, and it was extactly what was needed.
4 x Cable Ties
These are to attach the airline to the plastic rod.
2m x Airline
Need a piece long enough to reach down the plastic rod and an extra piece so that can hold the baster in the other hand without difficultly.
1 x Airline Elbow
This is to go at the bottom end of the plastic rod so that can direct the water/food out of the airline in a horizontal direction.
1 x Airline Joiner
To attach the airline to the baster, as the outlet from the baster is too large to fit the airline over.
1 x Baster
Commonly called turkey basters in the US, but here they are just basters. Very handy tool these are too.

The construction and shape is shown in the following diagram:


I used this to feed my mandarin brine shrimp, just suck the shrimp up into it, then find the mandarin and slowly squirt the shrimp out. Also cut up seafood really fine and squirt it to any of the smaller polyped corals that cannot take larger pieces.

Comments

Only registered users can write comments.
Please login or register.

Powered by AkoComment!

 
< Prev   Next >
New Articles
Most Popular Articles